210.320 Lot Size and Dimensional Standards | Wood Village Development Code

210.320 Lot Size and Dimensional Standards.

The minimum lot size and dimensions are shown in Table 210-3. All new lots created must comply with these standards. Lots larger than the minimum may not be divided without appropriate land use review if any of the resulting lots fail to meet the minimum standards. [See Section 300 for regulations which apply to Flag Lots, Partitions and Subdivision, and Planned Unit Developments.]

Table 210-3. Development Standards in Light Residential Zones
Standard	LR12	LR7.5
Minimum Lot Size
– Min. lot area⁽²⁾	12,000 sq ft	7,500 sq ft
– Min. lot width⁽²⁾	80 ft	60 ft
– Min. lot depth⁽²⁾ (See 210.320)	120 ft	100 ft
Minimum Number of Dwellings Per Net Acre	.9 (25%)	4.6 (80%)
Maximum Height (See 210.340)	35 ft	35 ft
Minimum Setbacks
– Front setback	10 ft⁽¹⁾	10 ft⁽¹⁾
– Garage setback⁽¹⁾	22 ft	22 ft
– Side setback⁽²⁾	10 ft	5 ft
– Rear setback⁽³⁾	15 ft	15 ft
Corner Lots
– Front setback	10 ft	10 ft
– Street side setback⁽³⁾	20 ft	10 ft
– Side setback⁽²⁾	10 ft	10 ft
– Rear setback (See 210.330)	20 ft	20 ft
Maximum Site Coverage (See 210.350 and (2), (3) below)	45%	45%

(1)Garages shall not be closer to the street than the plane of the street-facing façade. Porches shall be considered as part of the street-facing façade.

(2)For townhouses the minimum lot size is one thousand five hundred (1,500) square feet with a twenty (20) foot minimum width, no minimum depth, and zero (0) foot side setback when attached to another townhouse. Minimum site coverage for a townhouse is seventy (70) percent.

(3)For cottage housing the rear setback and street side setback is ten (10) feet. Cottage housing is also exempt from maximum lot coverage requirements.

(Ord. 2-2022 § 1 (Att. A))