Skip to main content
Loading…
This section is included in your selections.

A. Maximum Height. The maximum height for all structures is stated in Table 240-2.

B. Exemption to the Maximum Height.

(1) Projections allowed. Projections extending vertically for permitted buildings and uses, such as skylights, steeples, flagpoles, chimneys, and radio and television aerials, may be erected above the height limitations herein proscribed. Such structures shall not project more than 5' above the maximum permitted height.

(2) Utility power poles are exempt from the height limit.

Table 240-2. Development Standards in Manufacturing Zones

Standard

LM

GM

Minimum Lot Size

None

– Min. lot area

None

None

– Min. lot width

None

None

– Min. lot depth

None

(See Section 240.310)

Maximum Height

45 ft(1)

45 ft(1)

(See Section 240.330)

Minimum Setbacks

– Front setback

10 ft(2,3)

10 ft(2,3)

– Side setback

None(2,3)

None(2,3)

– Rear setback

None(2,3)

None(2,3)

(See Section 240.320)

Minimum Landscape

– Site area

10%(4)

10%(4)

Landscape Buffer

– Street frontage(5)

10 ft/L1(6,7)

10 ft/L1(6,7)

– Side yard

L3(6) or F2(7)

L3(6) or F2(7)

(See Sections 240.340 & 330)

(1)For sites abutting or facing a residential zone the maximum height is 25 feet within the first 25 feet from the lot line facing or abutting the residential zone. For distances further than 25 feet the maximum height is 45 feet.

(2)For sites abutting a commercial zone, the setback required for the abutting lot line shall be equal to that of the commercial zone.

(3)For sites abutting or facing a residential zone, the setback requirement for the facing or abutting lot line shall be 50 feet.

(4)Within boundaries of the development, minimum 10% or all site area available, whichever is greater.

(5)Applies to all street frontages.

(6)For sites facing or abutting a residential zone, the entire depth of the required setback must be landscaped.

(7)See Section 330 - Landscaping & Screening for a description of the landscape standards (i.e., L1, F2, etc.).